Gme GX294 User Manual download pdf (Page 8)

2. If not already fitted, install a small shelf

behind the bulkhead to take the mounting

bracket. Slide the GX294 through the slot

from the front and fit the mounting bracket

to the shelf from behind the bulkhead.

Adjust the assembly so the radio protrudes

through the slot as required and screw the

bracket into that position. Mount the

microphone holder in a convenient position

near the transceiver. Avoid fouling other

equipment with the microphone cord.

Power Connections

The GX294 can be installed in vessels with

either positive or negative ground electrical

systems. The radio’s positive (RED) lead must

be connected to the positive (

+

) side of the

electrical system and the negative (BLACK)

lead must connect to the negative (

-

) side.

Reversal of these connections will cause the

fuse to blow and may seriously damage the

transceiver and void the warranty.

If the fuse blows at any time, FIT ONLY THE

CORRECT 2 AMP 3AG (30mm) type. Two

spare fuses are clamped to the GX294’s rear

panel.

If the power leads are not long enough they

can be extended using at least 4mm outside

diameter cable.

8

SPK09

GX294IM 7/27/01 12:41 PM Page 8

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments