Gme GR968 User Manual

1110Fuse ReplacementIf any of the fuses blow, replace them with a standard 30 mm 3 AG type of the same rating, if the fuse blows a second time contact

11Enter in the name or part of the name of the le or directory using the corresponding buttons in the table, using the SEL button to select each char

12FM RADIO Frequency range: 87.5 – 108 MHz Frequency Step: 50 kHz Intermediate Frequency: 10.7 MHz Sensitivity (30 dB S/N): 10 dBuV (typical)

FEATURESCONTENTS

PRECAUTIONSCONTROLSReset Button12356

or VOL buttons) to restore the output volume to normal levels.7 Press the PWR button to turn the GR968 ON or OFF.8 Press the SEL button briey to

Retting1. Make sure the face panel is the right way up, as it cannot be attached upside down.2. Fit the right-hand end of the face panel into the t

6 7Manual TuningTo tune the radio manually, press and hold the or button until ‘Manual’ is displayed. Use the button to step downward in frequen

6 7will decrease rapidly. Release the button to continue playing the present track at the normal speed.Step to the Next TrackTo step immediately to th

94. Slide the GR968 back into the bracket slots and adjust for the correct position before tightening the gimbal knobs. 5. Complete the antenna lead

9This lead maintains the memories within the GR968 and is the main power source for the unit.2. Connect the Red wire labelled ‘IGNITION SWITCH (ACC)’